Edelbrock Small Block Chevy Performer RPM 210 Cylinder Head

Engineered specifically for Gen I Small-Block Chevrolet engines equipped with hydraulic roller camshafts, the Performer RPM 210 cc Cylinder Heads are designed as the ideal next-step upgrade from Edelbrock’s Performer series. These premium cylinder heads deliver increased airflow, superior quality, and exceptional performance for street and strip applications. Manufactured in Edelbrock’s ISO-certified facility in San Jacinto, California, each head is machined to exacting tolerances for optimal performance and durability. With larger 210 cc intake ports than comparable Performer RPM heads, this new design is intended for high-performance builds that require greater airflow and horsepower, while maintaining full compatibility with off-the-shelf components. These heads are ideal for 327 c.i. or larger Small-Block Chevrolet engines built between 1955 and 1986 that are not required to meet emission standards. Each Performer RPM 210 cc cylinder head comes fully assembled with premium valvetrain components, including stainless steel one-piece swirl-polished intake and exhaust valves with undercut stems for improved flow, 2-ring positive oil control seals, 3/8" rocker arm studs with 5/16" guide plates, hardened steel valve spring locators, and Edelbrock Sure-Seat valve springs, retainers, and keepers. Edelbrock’s patented Clean-Cast™ Technology sets these heads apart by eliminating internal casting flaws and producing smoother internal surfaces, thereby significantly improving airflow and coolant circulation. The result is more power and better cooling efficiency right out of the box. Engineered for serious performance applications, the Performer RPM 210 cc Cylinder Heads offer exceptional value and power gains for builders and enthusiasts working with Small Block Chevrolet platforms.

Fitment

Intake Valve Diameter-2.08 in; Intake Runner Volume-210 cc; Push Rod Diameter-(Suggested) 0.5625 in; Rocker Stud Diameter-0.375 in; Valve Angle - 23 Degree; Valve Spring Diameter-1.55 in; Valve Spring Maximum Lift-0.650 in; Valve Stem Diameter-0.3438 in; Requires 85502 head bolts. Can't be used with head studs. Equipped with valve springs for mechanical flat tappet and hydraulic roller camshaft applications. Champion RC12YC or equivalent 14mm x 3/4 in. reach spark plugs with flat gasket seat. Hardened pushrods required.

• 1985 Avanti II Base
• 1985 Avanti II GT
• 1985–1986 Chevrolet C10 Custom
• 1985–1986 Chevrolet C10 Scottsdale
• 1985–1986 Chevrolet C10 Silverado
• 1985–1986 Chevrolet C10 Suburban Custom
• 1985–1986 Chevrolet C10 Suburban Scottsdale
• 1985–1986 Chevrolet C10 Suburban Silverado
• 1985–1986 Chevrolet C20 Custom
• 1985–1986 Chevrolet C20 Scottsdale
• 1985–1986 Chevrolet C20 Silverado
• 1985–1986 Chevrolet C20 Suburban Custom
• 1985–1986 Chevrolet C20 Suburban Scottsdale
• 1985–1986 Chevrolet C20 Suburban Silverado
• 1985–1986 Chevrolet C30 Custom
• 1985–1986 Chevrolet C30 Scottsdale
• 1985–1986 Chevrolet C30 Silverado
• 1985–1986 Chevrolet Camaro Berlinetta
• 1985–1986 Chevrolet Camaro Iroc-Z
• 1985–1986 Chevrolet Camaro Sport
• 1985–1986 Chevrolet Camaro Z28
• 1985–1986 Chevrolet Caprice Classic
• 1985–1986 Chevrolet Corvette Base
• 1985–1986 Chevrolet El Camino Base
• 1985–1986 Chevrolet El Camino Conquista
• 1985–1986 Chevrolet El Camino SS
• 1985–1986 Chevrolet G10 Beauville
• 1985–1986 Chevrolet G10 Chevy Van
• 1985–1986 Chevrolet G10 Sportvan
• 1985–1986 Chevrolet G20 Beauville

…and 96 more applications.

Specifications

Manufacturer part number

60215

UPC

085347899661

Shipping weight & size

30.20 lb, 25.6 × 10.8 × 8.4 in

Documents

• Installation Instructions

Notices

• Not legal for sale or use in California on pollution-controlled vehicles.
• WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
• Special order item — ships direct from the manufacturer; extended lead times may apply.