Edelbrock Timing Chain And Gear Set Chry 318-360

Edelbrock part #7803 Performer-Link timing chain is for use with Edelbrock or stock cams. They have a solid-bushing chain for a true bearing surface that rolls with the sprockets, eliminating chain stretch. Cam sprockets are made from 35,000 psi tensile strength cast iron. Crank sprockets are made from billet SAE-1144 steel and induction heat treated. Four Performer-Link sets are stock replacement parts and 50-state legal (see listings in bold type). All other sets have three keyway setting points to ensure accurate timing selection for early or late-model vehicles. Performer-Link timing sets are not for use above 6500 rpm. Performer roller chain sets are engineered to operate up to 6500 rpm. Never hammer directly on chain or sprockets. You can crack the hardened links and pins and cause early failures. Use a sleeve for installations that require hammering, a brass drift punch may be used if you carefully alternate blows on either side of the sprocket to avoid cocking. Never stretch the chain with a screwdriver. Check for clearance between the timing chain and block and between the chain and front cover before reassembly. Be sure that both cam and crank sprockets are exactly in line with each other. Misalignment can cause chain to break.

Fitment

Chrysler:Small-Block:318 (5.2L)/340 (5.6L)/360 (5.9L)

• 1979 Dodge D100 Custom
• 1979 Dodge D100 Warlock II
• 1979–1980 Chrysler Cordoba 300
• 1979–1980 Dodge Aspen Base
• 1979–1980 Dodge B100 Base
• 1979–1980 Dodge B200 Base
• 1979–1980 Dodge B300 Base
• 1979–1980 Dodge CB300 Base
• 1979–1981 Chrysler LeBaron Base
• 1979–1981 Chrysler LeBaron Medallion
• 1979–1981 Chrysler LeBaron Salon
• 1979–1981 Chrysler Newport Base
• 1979–1981 Chrysler Town & Country Base
• 1979–1982 Chrysler New Yorker Base
• 1979–1983 Chrysler Cordoba Base
• 1980 Chrysler Cordoba Crown
• 1980 Dodge D200 Base
• 1980 Dodge D300 Base
• 1980 Dodge RD200 Base
• 1980 Dodge Ramcharger SE
• 1980 Dodge W200 Base
• 1980 Dodge W300 Base
• 1980 Plymouth Gran Fury Salon
• 1980 Plymouth PB100 Voyager
• 1980 Plymouth PB200 Voyager
• 1980 Plymouth PB300 Voyager
• 1980 Plymouth Volare Base
• 1980–1981 Chrysler LeBaron Special
• 1980–1981 Dodge Diplomat Base
• 1980–1981 Dodge St. Regis Base

…and 27 more applications.

Specifications

Manufacturer part number

7803

UPC

85347078035

Shipping weight & size

4.05 lb, 9.8 × 6.4 × 1.4 in

Documents

• Warranty

Notices

• WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
• Special order item — ships direct from the manufacturer; extended lead times may apply.